Deck Stair Toe Kick
Extruded aluminum toeboard is very strong corrosion-resistant and has a channel to receive the hardware.
Deck stair toe kick. Treads must be at least 10 inches deep measuring from front to back. Toe Board Height Requirements. Use extruded toeboard and special toeboard base flanges.
The risers or toe kick must be between seven and eight inches high. Featuring CoolTrac Advantage DuraLife Riser Boards have a polypropylene outer shell engineered to stay cooler than other composite deck boards. Stair tread depths shall be 11 inches 279 mm minimum.
Capped Composite Decking Construction Deck Screws Deck Stairs Decking Nexgen Premium Composites Decking Stairs Stringer. Do not have more than a 025 inch 05 cm clearance or opening above the walking-working surface and. The hardware is attached through special holes on the base flange fitting.
Stair rails on decks should be between 34 inches and 38 inches high measured vertically from the nose of the tread to the top of the rail. On 2016-12-31 by mod - Andy Thank you for your comment. Drive two deck screws through each outer stringer into the toe-kick.
A decks stairway should be carefully planned so that all the stair rises the vertical height of the steps and all the tread depths the horizontal length of the step runs are equal. This is the option that we recommend. A handrail is only required if your deck is more than thirty inches off the ground.
Have a vertical minimum height of 35 inches 9 cm as measured from the top edge of the toeboard to the level of the walking-working surface Clearance. The maximum riser height shall be 8 14 inches 2095 mm. The code has some very specific requirements for deck stairs.